Omnia

Description

Suitable for maintenance and deep cleaning of large areas where the utmost discretion is required during cleaning operations (for surfaces up to 2,500 sq. m).

The Omnia 26/32 scrubbing machines are available with disc brushes covering a 66 and 83 cm working width.

The Omnia range of scrubbing machines consists of two walk-behind models with automatic traction.
The Omnia range is extremely versatile thanks to the wide range of accessories which can be supplied, such as ppl or tynex brushes in variable bristle size and squeegee rubbers with different levels of hardness.
The strong mechanical structure and the high performance of its 36-Volt components can endure long cleaning sessions and work on demanding surfaces.

Omnia 26 B

Omnia 32 B

Working capacity 2640 m²/h Autonomy up to 4.5 h Working width 66 cm No. of brushes Ø 2(34.5) cm Width with squeegee 101.5 cm Solution tank 75 | Noise level dB <70 A Power supply Battery (24V)

Working capacity 3320 m²/h Autonomy up to 4.5 h Working width 83 cm No. of brushes Ø 2(43) cm Width with squeegee 111.5 cm Solution tank 105 | Noise level dB <70 A Power supply Battery (24V)

Advantages

Ease of use thanks to the instrument panel which, through switches and warning lamps, gives clear and comprehensive information on the machine status. Particular attention was paid to control ergonomics. The automatic version features a joystick which allow to easily drive the electrical actuator that lift up and lower the brush head and the squeegee, in addition to the automatic brush and solenoid valve switch-off kit, working when the machine is not operating.

The machine for everyone! The traction is driven by two small levers near the driving handle, so the speed can be controlled at all times. The ergonomic design and ease of controls ensures intuitive driving, even for non-specialised personnel.

Photo Gallery